HLC-1XU02AAC(1P/30A/208-240VAC) Definite Purpose Contactor

$11.50
Birim fiyatı /
$1.77 tasarruf edin

Vergi dahildir. Kargo, ödeme sayfasında hesaplanır.

*Applicable and Description

1. Applicable Scope

HLC-1XU02AAC(1P/30A/208-240VAC) Definite Purpose Contactor (Follow Defers To DP Contactor),Mainly Is Suitable For 50Hz Or 60Hz, When The AC-8a Use Category Fixed Working Voltage Is 240V Or 277V The Nominal Current Up To The 30A Electric Circuit, Is Suitable For The Starting And The Control Single-Phase Motor (Or Compressor) And Other Single-Phase Loads.Mainly Uses In The Domestic Electric Appliances Profession, Specially In Air Conditioning Profession,Conforms To IEC60947, UL508 and GB14048standard.

2.Type and Meaning

HL	C	–	1X	U	02	AA	C
Company Code	Contactor	Packing Y : Individual Box Pack – : Factory Bulk Pack	Pole: One Pole with Shunt	Coil Voltage	Rating of current	Terminal	With Cover

*Product Explanation And Main Technical Parameter

Type	HLC-1XU02AAC(1P/30A/208-240VAC) Definite Purpose Contactor
Standard	IEC60947	UL508
Rating of Current	Ie 30A	FLA: 30A
Resistive Amps	Ith 40A	RES: 40A
Rating of Contacts Voltage	Ue 240/277V	240/277/480/600VAC
Rating of Insulation Voltage	Ui 660V	600V
Rating of Coil Voltage	Us 208-240V	Us: 208-240VAC 50/60Hz
Mechanical Life	1000,000 Cycle	1000,000 Cycle
Electricity life	100,000 Cycle	250,000 Cycle
Product Explanation	1.Product Description HLC-1XU02AAC Is Suitable To Exchanges 50 Or 60hz, Fixed Working Voltage To 240V OR 277v, Fixed Operating Current To 30A Single-Phase Load Circuit Control,At Present, Widely Applies To The Single-Phase Mechanical Device Main Circuit As Well As The Single-Phase Air-Conditioner Compressor Control. 2 .The Regular Service Conditon And Installs The Condition a. In The Surrounding Air Temperature The Limiting Value Is +65 , Gets Down The Limiting Value Is -25 b. The Installation Site Elevation Does Not Surpass 2000m c. The Air Pollution Rank Is 2 Levels d. Installs The Category Is Ii ; e. Installment Facing The Gradient Does Not Surpass ±5° f. Not Remarkable Undulation, Impact And Vibration Place. 3 .Main Technical Parameter a. Contactor Coil Picking Up In 75% ~ 110% Us Reliably Working, Its Drop Out Voltage In 20% ~ 70%Us b. Contactor Use Category: Ac-1Ac8a c. Contactor In With 0.4m Place, Its Noise Below 40db. 4 . Installing Specification And Install Size a. Installs The Way To Be Fixed For The Screw, Some Two Kinds Install The Size To Choose One Kind Of Size Fitting Surface And The Horizontal Plane Are The Vertical Shape Gradient Are Not Bigger Than ±5° b. Before The Use Should Inspect The Power Terminal And The Contactor Quick Connect Whether Inserts Arrives, Is Reliable, Avoids Creating The Breakdown, Behind Check Off May Electrify Tries .
Product Explanation

*Conforms To The Standard

Conforms To National Standard And International Standard

1 Conforms To UL508, IEC60947, GB14048Standard

2 Approved By UL,CUL,TUV,CE,CCC,Safe Certification and ISO9001 System Certification(SGS)

CCC Certificate Number: 2005010309156761

UL Files Number: E251539

*Ordering Request

In Order To Guarantee You Purchase Right, Please Read The Specify Type Before Order.

Contactor Specification Model, Pole Number, Coil Control Voltage, Rating Of Operating Current, Wiring Way(Terminal), Whether With Cover ,The Packing Way, Etc

If You Request As Follows: Nominal Current: 30A, Working Voltage: 240/277V,480V,600V, Pole Number: One Pole Without Shunt, Coil Control Voltage:208-240V, Wiring Way: Quick Connect, Load Current: Single-Phase Motor Controls Or Heating Load, Packing: 50/Each Box (Factory Packing), With The Cover. Then You May Be Elect The Type : HLC-1XU02AAC

Lifts The Samples As Follows (Contains Derivation Type From This Model)

Rating of Current

Pole

Rating of Coil Control Voltage

Control Motor Power

24VAC

120VAC

208/240VAC

277VAC

380/480VAC

240VAC

30A

HLC-1XQ02AAC

HLC-1XT02AAC

HLC-1XU02AAC

HLC-1XV02AAC

HLC-1XH02AAC

1.5Kw